Welcome Visitor! Please take a few seconds and raggedyann
New Member
- Joined
- Feb 20, 2013
- Messages
- 87
- Reaction score
- 1
- Points
- 0
- Vehicle Year
- 1998
- Make / Model
- ford
- Transmission
- Automatic
my 98 ranger 4x4 - 4.0 engine.
I had no power windows, no dome light and no 4x4.
I replaced the GEM Module with one from a 98 Explorer
everything works but - now my o/d light comes on , speedometer stays at 25mph no matter how fast im going and the idle is not as good.
The GEM had different numbers, the last 2 letters from the original are EE.
The one from the Explorer - F87B-14B205-CF
OK , can the one from the Explorer be reprogrammed to work correctly ??
If I find one with the exact numbers, will it plug n play without reprogramming ??
I had no power windows, no dome light and no 4x4.
I replaced the GEM Module with one from a 98 Explorer
everything works but - now my o/d light comes on , speedometer stays at 25mph no matter how fast im going and the idle is not as good.
The GEM had different numbers, the last 2 letters from the original are EE.
The one from the Explorer - F87B-14B205-CF
OK , can the one from the Explorer be reprogrammed to work correctly ??
If I find one with the exact numbers, will it plug n play without reprogramming ??
Last edited:
