Welcome Visitor! Please take a few seconds and 
- Joined
- Jul 30, 2011
- Messages
- 406
- Reaction score
- 2
- Points
- 0
- Location
- Austin tx
- Vehicle Year
- 1994
- Make / Model
- Ford
- Engine Size
- 5.0
- Transmission
- Automatic
- My credo
- Built not bought
Ok so I thought I had it working right but it's not . The light that I have are the led optronic glolight stl111 surface mounts
Well I originally wired them up with the Hopkins 40215 trailer harness adapter that is plug and play . And ran the wires like a trailer . I get the parking light function to work which is this
The blinker work after swapping to a el12 flasher from stock
https://vimeo.com/148033673
But no brake light but 3rd does light up . Also just noticed that if the blinker is left to the on position and ignition is off completely. The brake light works . Do I have the right harness adapter ?
Edit . Do I just need a 3 to 2 universal trailer adapter ? This is my dd so any help would be awesome . I don't have any other tail options at this point
Edit 2 : or do I need a different turn signal switch from a 2 bulb setup ?
I just wanna go fast [emoji48]
Well I originally wired them up with the Hopkins 40215 trailer harness adapter that is plug and play . And ran the wires like a trailer . I get the parking light function to work which is this
The blinker work after swapping to a el12 flasher from stock
https://vimeo.com/148033673
But no brake light but 3rd does light up . Also just noticed that if the blinker is left to the on position and ignition is off completely. The brake light works . Do I have the right harness adapter ?
Edit . Do I just need a 3 to 2 universal trailer adapter ? This is my dd so any help would be awesome . I don't have any other tail options at this point
Edit 2 : or do I need a different turn signal switch from a 2 bulb setup ?
I just wanna go fast [emoji48]
Last edited:
