Deerpaw
New Member
- Joined
- Jul 25, 2016
- Messages
- 7
- Reaction score
- 0
- Points
- 0
- Location
- San Diego
- Vehicle Year
- 2009
- Make / Model
- Ford Ranger
- Engine Size
- 4.0
- Transmission
- Automatic
I finally got around to installing my lift spindles yesterday and I am 100% stoked on the outcome. I ended up with 6 inches of lift though and dont understand why...the front measured 25 3/4 before installation and now sits at 31 3/4 from bottom of the rim to bottom of the fender and the rear stayed the same at 29 3/4. Theres now a noticeable amount of rake but im ok with that. The spindles also added about an inch and a half of poke and with the stock spindles the truck had really bad negative camber that 3 alignment shops couldnt correct, that the lift spindles corrected. Overall the truck looks good and rides a hell of a lot better. Just wondering if anyone else had the same outcome? Also the install was pretty simple if anyone has questions let me know!