Welcome Visitor! Please take a few seconds and 
ab_slack
Member
- Joined
- Oct 17, 2011
- Messages
- 755
- Reaction score
- 12
- Points
- 18
- Location
- New Joisey
- Vehicle Year
- 1987
- Make / Model
- Ford
- Engine Size
- 2.9L
- Transmission
- Manual
I am referring to the bolt that sticks out that the liftgate latches onto when you close it.
I was hoping to replace the plastic piece on them in my 87 BII as part of a rattle reduction effort. When I pull it off, it has the large captive (one visible in the interior with liftgate open) that doesn't seem to come off. The threads appear to have a larger diameter than the hole in the washer.
I can adjust the position so the liftgate has some tension on it which reduces the rattle quite a but was hoping to do a bit better.
I was hoping to replace the plastic piece on them in my 87 BII as part of a rattle reduction effort. When I pull it off, it has the large captive (one visible in the interior with liftgate open) that doesn't seem to come off. The threads appear to have a larger diameter than the hole in the washer.
I can adjust the position so the liftgate has some tension on it which reduces the rattle quite a but was hoping to do a bit better.
