ok can someone please help me?


I don't know the answer but you should post in an appropriate forum.
Good luck,

Richard
 
The 3.8l SC engine uses the same bolt pattern as the 5.0/5.8l windsor.

No, it wont bolt up to any Ranger trans.
 
I have a 3.8 SC in my 1990 I went with an aod to a 205 if you want to go the auto route I used the SC aod and put a 4x4 output shaft in it from a late 80s f150 and used the same f150 adapter housing bolts right up to a 205. Front drive shaft is pretty close to trans pan had to modify my shifter linkage but works good and was fairly cheap.
 
i would just go buy the trans and tc combo from a junkyard 4x4 f-150 with a smallblock in it... 250's will have the 351
 
--weezl-- said:
i would just go buy the trans and tc combo from a junkyard 4x4 f-150 with a smallblock in it... 250's might have the 351
Click to expand...


Good idea but a 97+ 4.2l trans shifter will fit better then a pre-97.
 
You must log in or register to reply here.

Sponsored Ad

TRS Events & Gatherings

Where We Were in 2025 – The Ranger Station

Latest posts

Featured Rangers

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram

Latest Album Photos

IMG_4690.JPEG
IMG_4689.JPEG
IMG_4688.JPEG
IMG_4679.JPEG
IMG_4656.JPEG
IMG_4625.JPEG
IMG_4562.JPEG
IMG_4561.JPEG
IMG_4560.JPEG
IMG_4559.JPEG
IMG_4558.JPEG
IMG_4445.JPEG

Product Suggestions

Back
Top