Snorkels! Whos got one? How did you fab it?

Welpracing · 01-29-2012, 06:32 PM

Lookin to put a snorkel on my 88. Post up some pics of your snorkels and how you made it!!

**Sasquatch_Ryda** · 01-29-2012, 06:54 PM

Mine is a simple cowl snorkle. Runs from the air box into the cowl using some 4" high temp rubber exhaust hose.

clifford97 · 02-12-2012, 01:11 PM

i was lucky enough to have the cone style filter and filter box so got some 2" pvc pipe and some couplers fit right over the end of the box, wrapped some metal around the top and screwed it into the A-pillar, then found a screen for i believe a septic pump (not used!) used a grinder to cut out the hole in the fender for it to run up. there should be pictures in my profile, forgot my photobucket info sry.

01-29-2012, 06:32 PM	#1
Welpracing New Member Join Date: Jul 2009 Year: 1988 Make: Ford Model: Ranger Posts: 18 Rep Power: 0 iTrader: (0)	Snorkels! Whos got one? How did you fab it? Lookin to put a snorkel on my 88. Post up some pics of your snorkels and how you made it!!
	Tweet

01-29-2012, 06:54 PM	#2
Sasquatch_Ryda Coast Mountain Crawlers Join Date: Aug 2007 Location: Terrace, BC, Canada Year: 1991/1997/2008 Make: Ford Model: Ranger/Ranger/SuperDuty Engine: 4.0L/3.0L/6.4L Class: 4x4 Used For: Play toy/Daily Driver/Grocery Getter Posts: 7,470 Rep Power: 10 iTrader: (0)	Mine is a simple cowl snorkle. Runs from the air box into the cowl using some 4" high temp rubber exhaust hose. __________________ http://www.coastmountaincrawlers.com 1991 Ranger - one tons, 3 link, air shocks and 40's 1997 Ranger - reg cab flare side, 3.0L, M5OD-R1, 4x4, 4.56 gears, 6" lift, 33" MT's. 2008 F350 - 6.4L Powerstoke Diesel, 35x12.50R18 Procomp Xtreem AT's on 18x9 Incubus Crushers, AFE DPF/DOC Delete pipe, H&S XRT Pro tuner, AFE Stage 2 intake 1967 Mustang Coupe - 289, c4, pretty much stock
	Tweet

02-12-2012, 01:11 PM	#3
clifford97 Member Join Date: May 2010 Location: north jersey Year: 1997 Make: ford Model: ranger- (not a danger ranger!) Engine: 3.0 Class: 4x4 Used For: DD, fun! Posts: 418 Rep Power: 6 iTrader: (0)	i was lucky enough to have the cone style filter and filter box so got some 2" pvc pipe and some couplers fit right over the end of the box, wrapped some metal around the top and screwed it into the A-pillar, then found a screen for i believe a septic pump (not used!) used a grinder to cut out the hole in the fender for it to run up. there should be pictures in my profile, forgot my photobucket info sry. __________________ just my $.02 "I knew you were going to get stuck. you thought u were in your ranger, you forgot you were in a jeep"
	Tweet

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode