• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

PlumCrazy's Build


WNY964x4

ASE Master Certified
Supporting Member
Firefighter
ASE Certified Tech
TRS Banner 2010-2011
Joined
May 4, 2008
Messages
2,559
Reaction score
9
Points
38
Age
33
Location
East Pembroke , NY
Vehicle Year
72-03
Make / Model
Chevy,Ford,BMW
Engine Size
alot of different ones
the truck is coming along nicely man , it really looks good , keep up the good work :icon_thumby:
 


Joined
Mar 23, 2009
Messages
866
Reaction score
17
Points
18
Location
mississippi
Vehicle Year
1993
Make / Model
Ford
Engine Size
v6 3.0
Transmission
Automatic
thats one beast of a truck you got there :thumby:
 

PlumCrazy

Well-Known Member
Supporting Member
V8 Engine Swap
OTOTM Winner
Solid Axle Swap
RBV's on Boost
2014 Truck of The Year
TRS Banner 2010-2011
TRS Event Participant
Joined
Sep 22, 2008
Messages
4,541
Reaction score
168
Points
63
Location
Millersport, OH
Make / Model
Ford
Engine Type
V8
Transmission
Manual
2WD / 4WD
Solid Axle Swap 4x4

PlumCrazy

Well-Known Member
Supporting Member
V8 Engine Swap
OTOTM Winner
Solid Axle Swap
RBV's on Boost
2014 Truck of The Year
TRS Banner 2010-2011
TRS Event Participant
Joined
Sep 22, 2008
Messages
4,541
Reaction score
168
Points
63
Location
Millersport, OH
Make / Model
Ford
Engine Type
V8
Transmission
Manual
2WD / 4WD
Solid Axle Swap 4x4
I picked up some goodies today.

New air hose:yahoo:

And... A shifter for my manual case its from a B II with an auto and 1350 case, but it looks like it will work out fine.

I had to get creative to to get the handle apart.

I also snapped some night time pics






-plumcrazy
 

Flash Gordan

Savior of the Universe!!!
Supporting Member
Joined
Jan 27, 2009
Messages
563
Reaction score
7
Points
0
Location
South Jersey
Vehicle Year
1996
Make / Model
Ford
Engine Size
4.0L
Transmission
Automatic
Think you got enough lights on that beast yet?
 

PlumCrazy

Well-Known Member
Supporting Member
V8 Engine Swap
OTOTM Winner
Solid Axle Swap
RBV's on Boost
2014 Truck of The Year
TRS Banner 2010-2011
TRS Event Participant
Joined
Sep 22, 2008
Messages
4,541
Reaction score
168
Points
63
Location
Millersport, OH
Make / Model
Ford
Engine Type
V8
Transmission
Manual
2WD / 4WD
Solid Axle Swap 4x4
Think you got enough lights on that beast yet?
Nope, I want to take of the side emblems and put some marker light/turn signals there.

-plumcrazy
 

badinten

New Member
Joined
Jun 25, 2009
Messages
3
Reaction score
0
Points
0
Vehicle Year
i have two 1996
Make / Model
ford
Transmission
Manual
thats a sick build your doing
 

85rx7_93ranger

New Member
Joined
Nov 8, 2009
Messages
208
Reaction score
0
Points
0
Location
Bemidji, MN
Vehicle Year
1990
Make / Model
ford
Engine Size
2.9
Transmission
Manual
damn! your truck is one sexy beast i wanna live in it;)
 

PlumCrazy

Well-Known Member
Supporting Member
V8 Engine Swap
OTOTM Winner
Solid Axle Swap
RBV's on Boost
2014 Truck of The Year
TRS Banner 2010-2011
TRS Event Participant
Joined
Sep 22, 2008
Messages
4,541
Reaction score
168
Points
63
Location
Millersport, OH
Make / Model
Ford
Engine Type
V8
Transmission
Manual
2WD / 4WD
Solid Axle Swap 4x4

PlumCrazy

Well-Known Member
Supporting Member
V8 Engine Swap
OTOTM Winner
Solid Axle Swap
RBV's on Boost
2014 Truck of The Year
TRS Banner 2010-2011
TRS Event Participant
Joined
Sep 22, 2008
Messages
4,541
Reaction score
168
Points
63
Location
Millersport, OH
Make / Model
Ford
Engine Type
V8
Transmission
Manual
2WD / 4WD
Solid Axle Swap 4x4
I made some progress today. I was able to use the 1350 shifter and linkage. The bottom of the shifter itself would hit the transmission housing preventing it from going into 2 wheel and 4 hi, so I had to trim about a 1/4" off the shifter base.
The yellow is what I had to trim off. I welded the lever on the backside since I ground so much off the edge where the lever is pressed in.

My next issue was the little arm on the tcase. The shifter was lined up with it rather than being offset, so I had to cut the arm and offset it. I forgot to take pics of everything after I bolted it up, but I will.



I was able to cut my hole dead on the first time :yahoo: I measured the where the handle was in relation to the bolt holes so I could mark out my hole. Then after I got the plate cut I used it as a pattern for the floor.



The shifter comes through the floor just inside the console Ill get some pics up soon
 
Last edited:

86 slo-vo

02/2011 OTOTM Winner
OTOTM Winner
TRS Banner 2010-2011
Joined
Jan 5, 2009
Messages
4,510
Reaction score
36
Points
0
Location
owensboro, KY
Vehicle Year
1994
Make / Model
ford
Engine Size
4.0
Transmission
Manual
looks good...stil taking the lever out the side of the console?
 

PlumCrazy

Well-Known Member
Supporting Member
V8 Engine Swap
OTOTM Winner
Solid Axle Swap
RBV's on Boost
2014 Truck of The Year
TRS Banner 2010-2011
TRS Event Participant
Joined
Sep 22, 2008
Messages
4,541
Reaction score
168
Points
63
Location
Millersport, OH
Make / Model
Ford
Engine Type
V8
Transmission
Manual
2WD / 4WD
Solid Axle Swap 4x4
looks good...stil taking the lever out the side of the console?
Not 100% sure yet. Im am going to play with it tomorrow.

-plumcrazy
 

PlumCrazy

Well-Known Member
Supporting Member
V8 Engine Swap
OTOTM Winner
Solid Axle Swap
RBV's on Boost
2014 Truck of The Year
TRS Banner 2010-2011
TRS Event Participant
Joined
Sep 22, 2008
Messages
4,541
Reaction score
168
Points
63
Location
Millersport, OH
Make / Model
Ford
Engine Type
V8
Transmission
Manual
2WD / 4WD
Solid Axle Swap 4x4
I am going to have to modify the lever, because it hits the console.

The hole is completely hidden.

The linkage was lined up with the little lever so I had offset it. I also threaded the peg so I could put a nut on it.

Its hard to see, but this is where the lever had to be trimmed to clear the tranny
 

PlumCrazy

Well-Known Member
Supporting Member
V8 Engine Swap
OTOTM Winner
Solid Axle Swap
RBV's on Boost
2014 Truck of The Year
TRS Banner 2010-2011
TRS Event Participant
Joined
Sep 22, 2008
Messages
4,541
Reaction score
168
Points
63
Location
Millersport, OH
Make / Model
Ford
Engine Type
V8
Transmission
Manual
2WD / 4WD
Solid Axle Swap 4x4
Its done!!!!! I made a new lever and trimmed the console a bit and it works awesome.
here is what I started with.


heres what I ended with, its offest about 2"



I cut the threaded prortion off off the stock shifter and welded it to a peice of 1/2" rod that I put 90* in.




I Had to trim the console out a good bit

The lever is almost touching flloor in 2 hi, but 4 lo it is 1" away.





I made it hug the console to keep it away from leg.



I spoke to soon when I said I cut the hole perfect on my first try. It turns out I didnt make it wide enough, so when I had everything back together and went for a test drive, I found out that when I give it a little gas the transmission torques a little and the lever rubbed the edge of the hole making a terrible scratching/popping noise. So I had to take everything apart again to trim it up a little bit.:annoyed:

My brother was working on his car too, so I grabbed a pic




-plumcrazy
 
Last edited:

Sponsored Ad


Sponsored Ad

Members online

No members online now.

Today's birthdays

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Latest posts

Truck of The Month


Shran
April Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top