The Ranger Station Forums

The Ranger Station Forums (http://www.therangerstation.com/forums/index.php)
-   4WD Systems (http://www.therangerstation.com/forums/forumdisplay.php?f=14)
-   -   4x4 Front Hub O-Ring (http://www.therangerstation.com/forums/showthread.php?t=57238)

Tagg 08-12-2009 10:15 PM

4x4 Front Hub O-Ring
 
Finally found the replacement O-Ring at NAPA that the Ford dealership wanted $ 12.50 for, however it did include a 4x4 sticker (yippee):headbang:
The Ford part # F3TZ-1K106-A is replaced by a 3.50" I.D. x 3/32" thickness, Napa part # 727-2153. Hope this info helps somebody if needed.:icon_cheers:
This is the o-ring between the backside of the hub and the rotor.

AllanD 08-14-2009 12:38 PM

So, how much did NAPA want?

AD

Tagg 08-14-2009 07:48 PM

Whoopps !!!
 
Sorry I forgot to add that !!! They were $ 1.59 each. :yahoo:

Wicked_Sludge 08-15-2009 11:20 PM

i got 3 sets from the wrecking yard for free :D

BlackBII 08-16-2009 10:46 AM

Quote:

Originally Posted by Wicked_Sludge (Post 490913)
i got 3 sets from the wrecking yard for free :D

You Thief!

What did you do, stash them in your pockets?

Jspafford 08-16-2009 06:51 PM

Quote:

Originally Posted by Tagg (Post 488517)
Finally found the replacement O-Ring at NAPA that the Ford dealership wanted $ 12.50 for, however it did include a 4x4 sticker (yippee):headbang:
The Ford part # F3TZ-1K106-A is replaced by a 3.50" I.D. x 3/32" thickness, Napa part # 727-2153. Hope this info helps somebody if needed.:icon_cheers:
This is the o-ring between the backside of the hub and the rotor.

4x4 sticker?

You talking about the big oring behind the hub body on the pre-98 hubs?

Sasquatch_Ryda 08-16-2009 08:02 PM

Yes, they come with a replacement 4x4 sticker for the locking hub knob as well.

Wicked_Sludge 08-17-2009 09:55 PM

Quote:

Originally Posted by BlackBII (Post 491108)
You Thief!

What did you do, stash them in your pockets?

not at all. i walked into the office with a set of d-35 axle C-clips and thrust washers and a fistfull of hub o-rings, showed them to george and he rolled his eyes and waved me away :icon_thumby:

me and george go back...

ronclark 09-11-2009 12:30 AM

I got mine at a local 4x4 shop for a few bucks each, since napa said thy could not get them and just use RTV for a replacement :annoyed:

Natedog 09-15-2009 03:02 AM

Quote:

Originally Posted by Tagg (Post 488517)
Finally found the replacement O-Ring at NAPA that the Ford dealership wanted $ 12.50 for, however it did include a 4x4 sticker (yippee):headbang:
The Ford part # F3TZ-1K106-A is replaced by a 3.50" I.D. x 3/32" thickness, Napa part # 727-2153. Hope this info helps somebody if needed.:icon_cheers:
This is the o-ring between the backside of the hub and the rotor.

Good info, I'll see if they still have them.


All times are GMT -5. The time now is 02:19 AM.

1999-2018 / 959 Media LLC / All Rights Reserved