- Joined
- Dec 3, 2016
- Messages
- 221
- Reaction score
- 26
- Points
- 28
- Location
- riverview, fl
- Vehicle Year
- 1988
- Make / Model
- ranger xlt
- Engine Type
- 2.9 V6
- Engine Size
- , 2.9
- Transmission
- Automatic
- 2WD / 4WD
- 2WD
- Total Lift
- none but it is a convertible
- Tire Size
- stock
my completely stock 88 long bed ranger has arod sticking forward from the TIB just inboard of the knuckles. about 1/2 dia and 3 inches long. what's it do?
if you go to; how to tech,
scroll down to; the ranger front suspension,
and look at the first diagram,
it shows right behind the alignment adjusting sleeve.
my soon to be junked 86 4x4 does not have this rod.
my going on cl tomorrow 90 2wd project has the hole for the rod but no rod
neither of my series 3 rangers have the hole for the rod
again, what does it do?
if you go to; how to tech,
scroll down to; the ranger front suspension,
and look at the first diagram,
it shows right behind the alignment adjusting sleeve.
my soon to be junked 86 4x4 does not have this rod.
my going on cl tomorrow 90 2wd project has the hole for the rod but no rod
neither of my series 3 rangers have the hole for the rod
again, what does it do?