540milotalon
Member
- Joined
- Sep 22, 2019
- Messages
- 67
- Reaction score
- 6
- Points
- 8
- Location
- Near Shenandoah Valley, Va.
- Vehicle Year
- 1996
- Make / Model
- Ford/Ranger
- Transmission
- Automatic
I am installing a ‘99 5.0 from an Explorer in to a ‘96 Ranger.
I purchased the remote oil filter kit from James Duff parts and the filter will be a FL1-A but the filter is 3/4”-16 threads and so is the female thread on the block side adapter. The threads are 3/4”-16 female but the block seems to be 26 mm something.
Is there an adapter that goes from the 26 mm block (female) to 3/4”-16;male?
There was an adapter that is the metric to 3/4”-16 female but it will not allow the block adapter to fit flush with 3/4” nipple if I can even find one.
Thanks!
I purchased the remote oil filter kit from James Duff parts and the filter will be a FL1-A but the filter is 3/4”-16 threads and so is the female thread on the block side adapter. The threads are 3/4”-16 female but the block seems to be 26 mm something.
Is there an adapter that goes from the 26 mm block (female) to 3/4”-16;male?
There was an adapter that is the metric to 3/4”-16 female but it will not allow the block adapter to fit flush with 3/4” nipple if I can even find one.
Thanks!