Biggfoot44
Active Member
- Joined
- Jul 6, 2019
- Messages
- 110
- Reaction score
- 42
- Points
- 28
- Location
- USA
- Vehicle Year
- 1994
- Make / Model
- Ranger 2wd
- Transmission
- Automatic
Intresting thread .
So all years had the same CR , but the "95 up heads have 10cc smaller chambers, the difference being in the piston dish . Presumably putting later heads on an early engine would give a compression increase ? Would this be viable/ worthwhile ?
So all years had the same CR , but the "95 up heads have 10cc smaller chambers, the difference being in the piston dish . Presumably putting later heads on an early engine would give a compression increase ? Would this be viable/ worthwhile ?