- Joined
- Dec 14, 2014
- Messages
- 534
- Reaction score
- 63
- Points
- 28
- Location
- Goshen, NY
- Vehicle Year
-
1991
1992
- Make / Model
- Ford
- Transmission
- Manual
Looking to purchase several parts from a 1988 Ranger to ditch the boat anchor 2.9/a4ld in my '88 GT and drop a 2.3t 5 speed in it.
-Complete clutch pedal assembly with neutral safety switch and hydraulics (believe this to be an '88 only part, something to do with the safety switch). Have 2nd gen pedal assembly I could trade also..
-4 cyl 2wd engine mount brackets that bolt to the crossmember ('85-'97 should all be interchangeable)
-Complete & clean '88 2.3 EFI engine wire harness - no cuts or splices ('85-'87 may work but I'd rather start with an '88 harness)
-Uncut 2.3 EFI fuel lines (should be the same '85-'88)
If anyone has a complete '88 2.3 5 speed 2wd ranger in the lower NY/NJ/PA/CT area for cheap I'd consider purchasing the whole vehicle for parts.
Have a bunch of RBV parts to trade too, just ask me what you're looking for.
Thank you, Charles
-Complete clutch pedal assembly with neutral safety switch and hydraulics (believe this to be an '88 only part, something to do with the safety switch). Have 2nd gen pedal assembly I could trade also..
-4 cyl 2wd engine mount brackets that bolt to the crossmember ('85-'97 should all be interchangeable)
-Complete & clean '88 2.3 EFI engine wire harness - no cuts or splices ('85-'87 may work but I'd rather start with an '88 harness)
-Uncut 2.3 EFI fuel lines (should be the same '85-'88)
If anyone has a complete '88 2.3 5 speed 2wd ranger in the lower NY/NJ/PA/CT area for cheap I'd consider purchasing the whole vehicle for parts.
Have a bunch of RBV parts to trade too, just ask me what you're looking for.
Thank you, Charles