Denisefwd93
Well-Known Member
- Joined
- May 20, 2015
- Messages
- 2,261
- Reaction score
- 74
- Points
- 48
- Location
- South East PA
- Vehicle Year
- 1994
- Make / Model
- Ford
- Engine Type
- 4.0 V6
- Engine Size
- 4.0
- Transmission
- Manual
- 2WD / 4WD
- 4WD
- Total Lift
- stock, may get leveling springs in front "somday"
- Tire Size
- 235
Very rusty, but looks just like the picture or is that my picture looks just like the picture that I've seen.
it's 47" at the welds per the tech page,. The U-joints seem loose, only one is snug, there is no play whatsoever. the spline has a very tiny movement which probably means it needs Grease.
Should I get new U joints anyhow? it's not that expensive to drop it off at the Machine Shop
it's 47" at the welds per the tech page,. The U-joints seem loose, only one is snug, there is no play whatsoever. the spline has a very tiny movement which probably means it needs Grease.
Should I get new U joints anyhow? it's not that expensive to drop it off at the Machine Shop