I have a 99 3.0 4x4 5 speed man transmission and driving around it sound like I striped gears
? Is can I get a 2 wheel drive Trans and change just the tail housing to make it work with the transfer case
Any help thanks
My dad and I was changing out a 4.0 to a 4.0 no big deal. He got it running and it ran fine blew a rad hose that we forgot to tighten. Well we got home and I watched it a it idle 800 toms or so and then it drops to 500 and then the oil pressure shows nothing for 5-15 sec and idle back at 800 and...
My dad got two truck this month. Both are 1998 or 99 but they are the same motor. Saturday and Sunday he spend swapping the motor out went to start it. Did not start pulled the computer and had water poor out. So he swap computers out. Went to start it nothing. So he went to swap the pats system...
i have a 99 ranger t-bar setup 4x4 the tires are riding on the inside. the tire shop said its because of the 15x10 rims and the 32 11.5 tire but you said that i should have no problems. I'm going to take to a off road shop soon to see what they can do.
i see a lot of sas like dana 30 44 and...
What's the best/favorite mod you have ever done to any car/truck.
Best-Mine is going to be the winch that I got for Xmas it has saved my butt a few time
Favorite- is the sub I love music and a sub is the only way to go
Worst- is the crack the frame
uhttp://www.therangerstation.com/forums/picture.php?albumid=2083&pictureid=8035\uc0\u8236 }[/IMG]
Where should I exit the exhaust at.
Single
before the tire
Behind the tire ( stock setup )
Duels
straight the back
45
90
I am thinking about using a flowmaster 10 or 40
Tires are wearing on the inside and I took it to a shop. They said they are out of adjustment. They can't push the upper a arm out far enough for the tire to ride flat on the ground.
Anyone else run into this problem. It is a 1999 ranger 4.0 4x4 body lift and t-bars turn up a bit
32-11.5-15 on...
i just got my new 32x11.50r15 falken wild peak a/t today
my ?
i had the same size copper stt on a 15x10 rim and it looks good
but the falkens look smaller for being the same
should i use my stock 15x7 or should i use the 15x10
i have a 00 ranger 3.0 4x4 and i want to put a explorer 5.0 in it. what year explorer would be best for a donor and what options would it need to have to make it 4wd.
My dad wants it bolt in
what aftermarket parts will be needed. i know about the oil filter relocate kit and efan.
p.s...
I'm looking to get a bike. I was looking at 12 ninja 250 but 14 ninja 300 can come with abs. Is the new abs worth it
Tell me how it works please
Ps thanks
My dad just got a 90 ranger with a 4.0 man
Now will that motor work in my 99 ranger auto for a spare
Is everything the same bolt holes for the trans and everything else
Thank you
Ps if you need more info just ask don't be an ass
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.