Hey guys i have a 2001 ranger 4×4 4.0...and the tranny went out..so i got another used one from a 2004 and was wondering if there is any minor things i should or need to do before i replace the old one wth the newer one.I do plan to get a new converter for it....limited budget prevents me from a...
Yes my return line is leaking just as it enters the block thing that has 3 other lines in it...i have a 01 ranger 4 wheel drive 4.0 sohc ..and ita leaking bad right at that block.. do i need another line or the block that it enters into?i do most all of my own work i just am not educated on the...
Hey guys i have a 2001 ranger 4.0 and my blinkers quit...i check the fuse it was bad..replaced it..still nothing...then the wipers quit except on high...so i replaced the multiswitch and still no blinkers..and wipers now..wont shut off...any suggestions are much appreciated ...thanks
Hey guys. I just have a quick question maybe one of y'all can ask for me. I have a 2001 Ford Ranger 4.0 four-wheel drive I have now went through two batteries the alternator is charging but seems to be a low charge that it keeps until it kills the battery totally... is there a reason why the...
Hey everybody. I was just wondering if anyone knew why my temperature gauge on my 2001 four wheel drive Ranger is reading really cold way down almost on the C.. it has just started this I was wondering if a sensor is going bad or something.. it's full of coolant everything seems to be normal...
I have a 2001 4.0 four-wheel drive I recently had it in 4 Low and now it won't disengage any thoughts any answers would greatly be appreciated. As always thanks guys I always look forward do y'all's replies this is the best site ever
Ok guys im in the middle of a 8.8 rebuild ..bearings races..seals...ive inspected the gears an all appear to be good...but ive seen where alot of ppl go ahead an install a new ring gear at this point...is that always necessary?or will my old ring gear be ok?as always...thanks guys for yalls input
Ok guys..somebody throw me a bone...ive looked over my front diff in my 2001 4wheel drive to check the fluid...and i cant seem to find a place to check it...just a small tube that looks as if a hose should be attached to it on top of it...thanks for yalls help..ive learned so much here.
I just checked the fluid in the transfer case...i know by the finger test into the hole how to check it are you supposed to add automatic transmission fluid here... or does it cycle through the transmission. Thanks for any input
Hey guys ive got the 8.8 rear end..and i was wondering if there should be any slack or slop in the pinion shaft when the driveshaft is off...i also have the main keeper nut off to replace the pinion seal an noticed that there is some movement in the pinion shaft...thanks
Yes i have a 2001 ranger wth 8.8 in it an there seems to be leaking just behind the yolk on the rear driveshaft...does anyone know of a link to a article where i could fix this myself as i prefer to do my own maintenence an am learning more about the rangers all the time...this is my 3rd...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.