Search results

Super cab same as my truck basically. but it's a 3.0 5 speed 2 wheel drive. 208 on the od, Do I even want to look at this? I sent him an email it's a dealer that deals sells low priced vehicles he says the frame is "okay" I do love the super cab but I really don't need four wheel drive and all...

Wondering what to do if anything... Did I see plastic "bumper covers" on lmc? ( Will go look) Also wondering about newer explorer and ranger bumper "retrofitability". 🤔🤣

I ordered four items from ------- shipping was $35 I almost had a stroke! within 20 minutes I was on the horn trying to cancel i. one of the items was shipped already, l Ike -------, I'd like to be a loyal customer, but when you're in a situation where every penny counts and you can get...

Only people that are familiar with Yakima rack systems will know what I'm talkin about. And I believe they're being phased out, but I found q25 clips for my Q towers, They are listed as the ones for the Ford ranger cab, and I believe they go behind the weather stripping above the door...

I recently downloaded and was using Firefox which I've been using on my desktop for many years, it works, but it really slows down my cell phone I mean so slow I couldn't really use it. But it stop almost all advertising with the adblock plus download that is an add-on to Firefox Anyway I'm...

Went on a spending spree I got my headliner fabric! Cost me a whole $20 at joanns 😱 It looks to be a rather time-consuming job, pulling all the panels and trim. I've done headliners with my son on smaller vehicles, If y'all know any shortcuts for job let me know! They make replacement...

I made a double post wanted to delete.. seems that I can't

Yee Haw! Oops!

On post like this "attach files"shows but on some of my new and ongoing threads the "attach files" function is missing from the bottom of the page! I don't understand that!

I haven't found it but I'm looking for what the stock height would be with the original front springs on my 94 four wheel drive 4.0. I'm aware of the washers to give a slight lift in the front but it seems to me it's the same amount of work as replacing the front springs although the cost way...

93- 97? mine is a 94 4.0 Manifold air duct, airbox plate for the duct, vacuum damper motor, air duct to intake from rad support, AND the rubber intake hose from air box to Throttle body! I don't want to buy a "cold air intake"

I've never seen a Ford ranger without fluid oil all over the pump,reservoir and the hoses, I have a set of hoses that will get installed "someday" pretty sure my return hose is leaking. but! where does it leak when you have the truck up jacks and you move the wheels left right and back? I...

On my long list of things to do, I want to install a USB receptacle in the console so I don't have wire hanging from the dashboard and getting hung up on the gear shift. I'm thinking the power source can be from the power seat circuit? also thinking if it's inside the console cell phone can...

it doesn't work, Now that I can actually spend time driving my truck, I'd like to start checking out the cruise control. , First questions, I don't remember seeing a brake pedal switch, would they be separate? or is the brake pedal switch dual purpose I haven't a really started looking yet.

Please say yes! I've been searching for so long! Found a set less than 10 miles away! Eddie Bauer model

My question today is; were the original rear spring mounts done with the shackles on top? The shackles are on the bottom of nearly every picture I see. Although they're rusty, they have been replaced and there's bolts on both, of these should we flip them side-to-side when we do some other...

Not based on what the aftermarket sellers are offering but because the stock air intake tube is missing from the airbox along with it hot air ducts from the manifold missing I feel I need to do something,. Should I at least get a flexible 3 inch round and duct it from behind the grill next to...

I finally had my truck over to the shop , he put it up and ran it with the wheesl spinning both back tires have flat spots in them. I've been going a bit crazy trying to find the hopping bouncing of the back and the truck doesn't shake. With the wheels off the ground & spinning, So, I'm going...

I changed the title, this is a very difficult search! From what I've seen of ranger frames,it seems to me a newer rivited rear frame, like a 2000 CAN BE welded to an older like my 94 if we establish they are both the same wheelbase can anybody confirm or deny that??