baddmove
New Member
- Joined
- Jun 5, 2008
- Messages
- 14
- Reaction score
- 0
- Points
- 0
- Location
- Pullman,WA
- Vehicle Year
- 1989
- Make / Model
- ford
- Engine Size
- 2.9
- Transmission
- Automatic
This is my post from the Bronco II forums at FTE
Thurs. morning i lost power to my FP, i thought it went bad so i spent most of my weekend replacing the FP..(it's in the tank) when i got done, still didn't work so i replaced the FP relay , still no power to the FP, what else can i try guys? I need my BII to go to work...maybe in the ignition?
o.k. i just put in a new ignition module and still no power to pump....
i am open to any suggestions.....
and yes, inertia switch is closed..that was the first thing i checked....
I checked the Main computer(PCM) by taking the one from the 89" out and putting it in my 86"...it worked just fine...getting cold here so i need to get this thing fixed as soon as possible
there are 3 relays in that box,the box under the big fuses on fender..(plug colors),grey,,orange and green..i checked the grey one...
Well..i took the whole panel to the parts store and it is showing 5 pins on the FP one, the other 2 only have 4 pins..so my FP one is the grey one...
I just checked and there is power the the green and orange one, but not the Grey one..is there a fusible link anywhere that you know of?
The 89" seems to have a lot of differences than the previous years..
__________________
Thurs. morning i lost power to my FP, i thought it went bad so i spent most of my weekend replacing the FP..(it's in the tank) when i got done, still didn't work so i replaced the FP relay , still no power to the FP, what else can i try guys? I need my BII to go to work...maybe in the ignition?
o.k. i just put in a new ignition module and still no power to pump....
i am open to any suggestions.....
and yes, inertia switch is closed..that was the first thing i checked....
I checked the Main computer(PCM) by taking the one from the 89" out and putting it in my 86"...it worked just fine...getting cold here so i need to get this thing fixed as soon as possible
there are 3 relays in that box,the box under the big fuses on fender..(plug colors),grey,,orange and green..i checked the grey one...
Well..i took the whole panel to the parts store and it is showing 5 pins on the FP one, the other 2 only have 4 pins..so my FP one is the grey one...
I just checked and there is power the the green and orange one, but not the Grey one..is there a fusible link anywhere that you know of?
The 89" seems to have a lot of differences than the previous years..
__________________