View Full Version : Help with vacuum lines!
97RangerXLT
09-25-2010, 08:13 PM
Ok changed out the lower intake gasket and valve cover gaskets... putting the truck back together. I have a left over vacuum line on the passenger side of the engine, what does it go to?
http://www.flickr.com/photos/11917952@N04/5024117559
the line that is in the picture is part of a "Y", the other part of the y goes to a vacuum ball. not sure where the leg of the Y goes.
Thanks!
AJ
hondaxr650
09-26-2010, 12:07 AM
Fuel pressure regulator.
97RangerXLT
09-26-2010, 12:59 AM
Fuel pressure regulator.
I'll bet that is it! Thanks!
AJ
kimcrwbr1
09-26-2010, 02:19 AM
Here is the vacuum diagram in the tech library there should be one under your hood somewhere.
http://www.therangerstation.com/tech_library/diagrams/95-99_Ranger_4-0_vacuum_hose_diagram.gif
kimcrwbr1
09-26-2010, 02:36 AM
I believe the diagram shows you the general area of the components as your looking from the front of the engine.
Destroyer000
09-26-2010, 08:41 AM
fuel pressure regulator or the vacuum ball
97RangerXLT
09-27-2010, 12:48 AM
it was the fuel pressure regulator. I completely forgot to hook that back up.
Thanks for the input guys! the truck is back on the road!
AJ
vBulletin® v3.8.6, Copyright ©2000-2013, Jelsoft Enterprises Ltd.