Lifting 05 Ranger edge


ClevlandSteamer

10+ Year Member

Joined
Oct 20, 2007
Messages
1
Points
3,001
Age
37
Vehicle Year
1995
Transmission
Manual
I was wondering if I could just crank up the torsion bars in the front enough to level it out with the back to put some 33 BFGs. I may have to go with 31s, but that's besides the point.

How would I go about raising the torsions bars for about a 1.5 inch life and would I need to get a front end alignment?
 
Is that a 4x4 truck? If so follow the bars until they end, about under the seat area of the frame. Tighten the bolts under the torsion bar with a socket and breaker bar 4 or 5 turns, and measure. Drive around for a little and measure agian, go for 1.5 to 2 inches of lift max.I did it to my bro in laws truck and put 265 76 16 on the stock rims.. looks really good
 
Last edited:
tanbuddy said:
Is that a 4x4 truck? If so follow the bars until they end, about under the seat area of the frame. Tighten the bolts under the torsion bar with a socket and breaker bar 4 or 5 turns, and measure. Drive around for a little and measure agian, go for 1.5 to 2 inches of lift max.I did it to my bro in laws truck and put 265 76 16 on the stock rims.. looks really good
Click to expand...
all edges 2wd and 4wd are torsion bar suspension.
 
You must log in or register to reply here.

Sponsored Ad

TRS Events & Gatherings

Where We Were in 2025 – The Ranger Station

Latest posts

Featured Rangers

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram

Latest Album Photos

IMG_4690.JPEG
IMG_4689.JPEG
IMG_4688.JPEG
IMG_4679.JPEG
IMG_4656.JPEG
IMG_4625.JPEG
IMG_4562.JPEG
IMG_4561.JPEG
IMG_4560.JPEG
IMG_4559.JPEG
IMG_4558.JPEG
IMG_4445.JPEG

Product Suggestions

Back
Top