Jegs 10 n 12 point cages

[CheapThrillB2]

http://www.jegs.com/webapp/wcs/stores/servlet/KeywordSearchCmd?storeId=10001&catalogId=10002&langId=-1&N=0&Ntt=550-945505K&Ntk=all&Nty=1&D=550-945505K&Ntx=mode%2Bmatchallany&Dx=mode%2Bmatchallany&searchTerm=550-945505K

anybody here buy either the 10 or 12 point cages and install them?

and by chance has anyone modified it to work in a B2?

i am thinking the 10 point but their info on the site is so little, looking for real world expeirence

[predator]

no expiriance here..might want to call jegs and see if they have them for different vehicles or if they can be modified to fit other vehicles...or just build your own, cant be that hard.....

[Captain Ledd]

Bump. Was looking into these as well. any comments on them?

[CheapThrillB2]

nobody?

[JohnnyU]

I have no first-hand experience, but from everything I've read, they are junk. I've heard accounts of them not fitting as well as they should, still needing to be coped, etc.

Honestly, I think a race shop, a real race shop, such as one that builds entire chassis or good cages for dirt track or the like would be a bout your best bet.

[Bray D]

take that 269 bucks, put it towards a bender, and make one. then you'll have a bender to make sliders/bumpers/cages for all the other projects cheapthrills turns out.

[sick toys]

I have had experiance with s&w racing's cages(very nice)and marsh racing wheels has a vey cheep cage also, BE careful if you have a shop do it (K&W by flint) did one for me years ago for an ext-cab ranger .I got charged $1000. and then after I got to looking at it ,it wasent even welded all the way around on top !!!!:woot:what a joke, If you do pay through the nose for a shop , please...double check there work before you pay. BUT s&w is who I buy from!

[JohnnyU]

I have had experiance with s&w racing's cages(very nice)


I'll second that. S&W makes very nice cages. I've seen a couple K5's with their cages in them.

[CheapThrillB2]

holshotracer just bought a bender and chop saw, and Fri i will be buying a notcher and i already have a nice lincoln welder. So now for the research in cage designs begins

[CheapThrillB2]

the jegs cage is extremely generic, about all tubes are to long. The directions ae just an generic picture of the cage assm and thats it. Basically a puzzle.