replacing clutch on 1986 ranger

emo666 · Feb 11, 2013

Where can I buy the small O-ring that sits on top the bellhousing where the clutch master hose attaches to the slave cylinder?? Mine is not the side quick disconnect like the newer Rangers. My hose is held in by a clip on the top of the slave cylinder--the O-ring sits inside the top of the slave cylinder.

adsm08 · Feb 11, 2013

Run to any parts store, or any dealership parts counter with the old one and look. Most places keep a supply of just basic o-rings around.

locked ranger · Feb 11, 2013

I have not worked on that in years so i cant picture it in my mind but any autoparts store should have an assortment of o-rings, if you have the old one it would be a plus.

emo666 · Feb 11, 2013

O-ring

locked ranger said:
I have not worked on that in years so i cant picture it in my mind but any autoparts store should have an assortment of o-rings, if you have the old one it would be a plus.

Nope--wrong answer ---any old O-ring won't do, it has to be the correct inside diameter and the correct hardness as it has to compress somewhat easily yet hold it's shape against fluid pressure. I might try ford.

locked ranger · Feb 11, 2013

If you knew this already, why are you taking up space on here? Hope you find the part you need and taking the old one with you (like i said already!) would be a plus. Meaning that the auto parts store could help you get the right part! LOL

m371961 · Feb 12, 2013

I think I know what you mean. When I replaced my slave cyl, the new one had no ring. Went back to parts store and they took one out of another cylinder box. Think the F150s used the same ring. May have to buy a new slave cylinder.

adsm08 · Feb 12, 2013

You should be replacing the slave anyway.

robertc1024 · Feb 12, 2013

Just watch the o-ring material. Some compounds don't like some fluids. Parker O-Ring catalog is a wealth of information.

hende · Feb 13, 2013

I would use rubber bands just wrap it around a few times tell its the right size. May need to use a lil wad of bubble gum also I find bubble um to work best. Hope this helps. This is what I would do if I didnt do what everyone else and the ford tech said just go to a parts house and match it up.

replacing clutch on 1986 ranger

emo666

Member

adsm08

Senior Master Grease Monkey

locked ranger

New Member

emo666

Member

locked ranger

New Member

m371961

New Member

adsm08

Senior Master Grease Monkey

robertc1024

Well-Known Member

hende

New Member

Sponsored Ad

Sponsored Ad

Staff online

Members online

Today's birthdays

Member & Vendor Upgrades

Latest posts

Truck of The Month

Recently Featured

Follow TRS On Instagram

Latest Album Photos

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store

Sponsored Ad

Sponsored Ad

Sponsored Ad

Amazon Deals