- Joined
- Jun 21, 2012
- Messages
- 101
- Points
- 1,601
- Vehicle Year
- 1990
- Transmission
- Manual
I have a bronco 2 and I'm trying to figure out of it has any lift on it.
I tried searching google and here and have come up dry.
The only way I know how to check lift is a measurement from the centre of the axle to the lip of the fender.
(or I could crawl under and measure the space of the axle stops, but I could not find that info either)
My measurements are centre of axle to fender lip on the drivers side.
(maybe +/- 1/8 inch error possibility)
16 3/4 rear
17 1/4 front
If you have a stock truck or know the measurements please sound off.
thank you for any info in advance.
I tried searching google and here and have come up dry.
The only way I know how to check lift is a measurement from the centre of the axle to the lip of the fender.
(or I could crawl under and measure the space of the axle stops, but I could not find that info either)
My measurements are centre of axle to fender lip on the drivers side.
(maybe +/- 1/8 inch error possibility)
16 3/4 rear
17 1/4 front
If you have a stock truck or know the measurements please sound off.
thank you for any info in advance.
